ANALISIS PENYEBAB SISA PIPA PRODUKSI KAPAL X MENGGUNAKAN NEW SEVEN TOOLS DAN FMEA (STUDI KASUS PADA PT. KRS)

Aditya Tri Pratama; Isna Nugraha

doi:10.26740/jptn.v12n1.p47-57

Aditya Tri Pratama Universitas Pembangunan Nasional "Veteran" Jawa Timur
Isna Nugraha Universitas Pembangunan Nasional “Veteran” Jawa Timur

DOI: https://doi.org/10.26740/jptn.v12n1.p47-57

Abstract

PT. KRS is a company operating in the maritime sector, especially ship production. Apart from producing ships, this company also has the capability to repair and overhaul. In 2023 PT. KRS launched ship However, in making this ship there is still a lot of material remaining. This research is devoted to pipe materials. This research aims to minimize the amount of remaining pipe material from the production of ship X. To overcome this problem, we need to find out what variables influence the amount of remaining pipe material. This research uses New Seven Tools analysis and the Failure Mode and Effect Analysis (FMEA) technique. After processing and analysis, the elements determined to be the cause of the large amount of remaining pipe material were the lack of ability and accuracy of workers in the management and maintenance of materials and machines. Apart from that, the environment also influences the quality of the material. Therefore, assessing potential improvements includes training and socializing Standard Operating Procedures (SOP) for machine operation, carrying out routine maintenance, and maintaining the project material storage warehouse.

References

Andiyanto, S., Sutrisno, A., & Punuhsingon, C. C. (2022). Penerapan Metode FMEA (Failure Mode and Effect Analysis) Pada UD. Lajamin Untuk Memperbaiki Kualitas Produk Tas. Jurnal Online Poros Teknik Mesin Unsrat, 6(2), 51–58.

Azhar, A., & Agung K, T. (2019). Standarisasi Harga Pembangunan Kapal Perintis. Jurnal Teknologi Maritim, 2(1), 1–6. https://doi.org/10.35991/jtm.v2i1.902

Aziza, N., & Setiaji, F. B. (2020). Pengendalian Kualitas Produk Mebel Dengan Pendekatan Metode New Seven Tools. Teknika: Engineering and Sains Journal, 4(1), 27. https://doi.org/10.51804/tesj.v4i1.791.27-34

Carlson, C. S. (2014). Understanding and Applying the Fundamentals of FMEAs. 2014 Annual Reliability and Maintainability Symposium (RAMS), 12.

Erni Yusnita, R. P. (2020). Analisa Pengendalian Kualitas Paving Block dengan Metode New Seven Tools di CV . Arga Reyhan Bahari Sumatera Utara metode atau alat yang digunakan untuk Dengan Metode New Seven Tools Di CV . Arga. Jurnal JIME, 4(November), 138–147.

Gilang, D., & Prakoso, I. (2023). Analisis Kualitas Produk Joran Pancing Dengan Menggunakan Metode New Seven Tools ( Studi Kasus : Jurnal Taguchi, 3(1), 68–79.

Ma’ruf, B., & MM, M. (2014). Aplikasi Manajemen dan Teknologi untuk Mendorong Daya Saing Industri Kapal dan Industri Pelayaran Nasional. Prosiding Seminar Nasional Manajemen …, May, 1995–1998.

Nuciferani, F. T., Aulady, M. F. N., Choiriyah, S., Sumarsono, D. S. B., Sipil, T., Teknologi, I., & Tama, A. (2022). Penerapan Lean Construction pada Proyek Perumahan terhadap Waste Material. Prosiding Seminar Nasional Sains dan Teknologi Terapan, 1(1), 1–6.

Setiawan, A., & Nuryanto. (2023). ANALISIS PENGENDALIAN KUALITAS KEMASAN AIR MINUM JENIS GALON CLEO DENGAN METODE NEW SEVEN TOOLS. Jurnal Cakrawala Ilmiah, 2(11), 4371–4380. https://bnr.bg/post/101787017/bsp-za-balgaria-e-pod-nomer-1-v-buletinata-za-vota-gerb-s-nomer-2-pp-db-s-nomer-12

Setiawan, A., & Robi’in, M. A. (2021). ANALISA DAN EVALUASI SISA MATERIAL KONSTRUKSI PADA PEMBANGUNAN PERUMAHAN DI BOJONEGORO. Dearsip, 1(2), 79–92.

Situngkir, D. I. (2019). Pengaplikasian FMEA untuk Mendukung Pemilihan Strategi Pemeliharaan pada Paper Machine. FLYWHEEL : Jurnal Teknik Mesin Untirta, 1(1), 39. https://doi.org/10.36055/fwl.v1i1.5489

Zakariya, Y., Mu’tamar, M. F. F., & Hidayat, K. (2020). Analisis Pengendalian Mutu Produk Air Minum dalam Kemasan Menggunakan Metode New Seven Tools (Studi Kasus di PT. DEA). Rekayasa, 13(2), 97–102. https://doi.org/10.21107/rekayasa.v13i2.5453