ANALISIS PENGARUH KARAKTERISTIK BAHAN BAKU AGREGAT PASIR JEMBER DAN KERIKIL PANDAAN TERHADAP KUAT TEKAN, KUAT TARIK, DAN MODULUS ELASTISITAS BETON MUTU TINGGI

  • IRMA LESTARI ANGGRAINI
  • IRMA LESTARI ANGGRAINI

Abstract

Tujuan dari penelitian ini adalah untuk mengetahui karakteristik pasir Jember dan kerikil Pandaan beserta pengaruhnya pada beton mutu tinggi yang direncanakan. Kebutuhan penggunaan beton sebagai salah satu bagian dari sektor konstruksi menuntut adanya peningkatan kekuatan beton sebagai salah satu faktor utama yang diharapkan pada  kemajuan teknologi beton saat ini. Jember yang berada di wilayah Gunung Semeru dan pantai Selatan memiliki potensi melimpah berupa material agregat halus pasir besi dan kota Pandaan yang juga menjadi salah satu kota yang terkenal memiliki potensi alam berupa kerikil merupakan alasan mengapa dipilihnya material dari dua daerah ini untuk dijadikan sebagai campuran beton mutu tinggi.

Penelitian ini dilaksanakan untuk mengetahui karakteristik agregat pasir Jember dan kerikil Pandaan. Karakteristik tersebut meliputi berat jenis, analisa ayakan, berat volume, kadar lumpur, dan keausan pada kerikil. Agregat yang dipilih untuk direncanakan menjadi beton mutu tinggi juga agregat pasir jember dan kerikil pandaan dengan rencana mutu 40MPa, 45Mpa, dan 50MPa. Benda uji yang digunakan adalah silinder (15 cm x 30cm) berjumlah 33 benda uji, tiap mutu beton 11 benda uji, serta perencanaan Mix Design menggunakan metode DOE pada Conmixer V1.0 Vista.

Penelitian ini juga dilaksanakan untuk mengetahui pengaruh karakteristik terhadap kuat tekan, kuat tarik (split cylinder), dan modulus elastisitas pada beton mutu tinggi. Hasil penelitian menunjukkan bahwa  dari beberapa pengujian karakteristik (berat jenis, analisa ayakan, berat volume, kadar lumpur, dan keausan) terhadap kuat tekan, modulus elastisitas dan kuat tarik belah beton mutu tinggi mencapai nilai tegangan  yang direncanakan namun belum memenuhi syarat regangan. Tegangan rata-rata yang direncanakan 40 MPa mencapai 43,13 MPa, tegangan yang direncanakan 45 MPa mencapai 47,86 MPa, dan yang direncanakan 50 MPa mencapai 52,65 MPa

Kata Kunci: Beton Mutu Tinggi, Pasir Jember, Kerikil Pandaan, Karakteristik, Kuat Tekan, Kuat Tarik, dan Modulus Elastisitas 

The purpose of this study was to determine the characteristics of Jember’s sand and Pandaan’s gravel  influence on high quality concrete that is planned. The used of concrete as a part of contruction has raised the needs of betterment upon quality and strength of concrete in technology of concrete nowadays. Jember which is located in the region of Mount Semeru and South coast has the potential abundance of material in the form of fine aggregate and sand iron Pandaan city is also one of the famous city has the potential of nature in the form of gravel is the reason why choosing the material from these two areas to be used as a quality concrete mix high.

This study was conducted to investigate the characteristics of aggregate sand and gravel Pandaan Jember. These characteristics include density, sieve analysis, heavy volume, levels of mud, and wear and tear on the gravel. Aggregate planned to be selected for high strength concrete also muddy sand and gravel aggregate Pandaan with quality plan 40MPa, 45MPa, and 50MPa. Specimens used were cylindrical (15 cm x 30cm) totaling 33 test specimens, each specimen quality concrete 11, as well as the planning of Mix Design using the DOE method Conmixer V1.0 Vista. This study was also conducted to determine the effect of the characteristics of the compressive strength, tensile strength (split cylinder), and modulus of elasticity of high strength concrete.

The results showed that the testing of several characteristics (specific gravity, sieve analysis, heavy volume, the levels of sludge, wear and tear) on the compressive strength, modulus of elasticity and tensile strength of high strength concrete sides reached a voltage value that is planned but not yet eligible strain. Average voltage reaches the planned 40 MPa 43.13 MPa, 45 MPa planned voltage reaches 47.86 MPa and 50 MPa achieve the planned 52.65 Mpa.

Keywords: High Quality Concrete, Jember Sand, Gravel Pandaan, Characteristics, Compressive Strenght, Tensile Strenght, and Modulus of Elasticity

Published
2014-08-05
Abstract Views: 96
PDF Downloads: 170