PENGARUH MUTU BETON TERHADAP KUAT LEKAT ANTARA BETON DAN BAJA TULANGAN

  • SEPHIN RUSYADI

Abstract

Salah satu persyaratan dalam struktur beton bertulang adalah dengan adanya lekatan antara baja tulangan dan beton. Hilangnya lekatan antara beton dan baja tulangan pada struktur mengakibatkan keruntuhan total pada beton. Untuk menghindari hal tersebut perlu ditinjau nilai tegangan lekat beton dan baja tulangan agar diperoleh keseimbangan gaya antara baja tulangan dan beton. Kuat lekat beton terhadap baja tulangan dipengaruhi oleh beberapa faktor, salah satunya adalah mutu beton. Menurut logika semakin besar mutu beton maka semakin kuat pula daya cengkram lekatan terhadap tulangan, namun hal ini masih belum dapat ditentukan nilai yang pasti dari setiap besarnya mutu beton.

                Penelitian ini dilakukan dengan cara membandingkan kuat lekat antara baja tulangan pada mutu beton yang berbeda beda. Penelitian ini merupakan eksperimen dengan cara membuat benda uji beton denganBaja tulangan D10 panjang 30 cm. Baja tulangan ini ditanam pada beton dengan kedalaman 16 cm pada bagian atas dilebihkan 14 cm untuk dijepit pada saat pengujian tarik (pull out) beton.Uji pull out dilakukan pada saat benda uji berumur28 hari dengan menggunakan Universal Testing Mechine.

                Hasil penelitian menunjukan bahwa semakin besar mutu beton maka beban lekat maksimal yang terjadi semakin besar. Besar nilai beban lekat yang terjadi yang terkecil 1000N dan yang paling besar 4000 N. Ditinjau dari kuat lekat yang terjadi, semakin besar mutu beton maka kuat lekat maksimal beton pada baja tulangan semakin besar. Besar nilai kuat lekat yang terjadi yang paling kecil 1MPa dan yang terbesar 2,2 MPa atau mengalami kenaikan sekitar 15% sampai 26% dari setiap kenaikan mutu beton. Ditinjau dari tegangan baja tulangan yang terjadi, semakin besar mutu beton maka tegangan baja tulangan yang terjadi semakin besar dan mendekati tegangan baja maksimal. Besar nilai tegangan baja tulangan yang terjadi paling kecil 18 MPa dan yang paling besar 50 MPa. Ditinjau dari kerusakan benda uji, semua kerusakan benda uji terjadi pada beton namun semakin besar mutu beton maka kerusakan yang terjadi pada beton semakin kecil.

Kata kunci : kuat lekat, beton, baja tulangan

                  One of the requirements of the reinforced concrete structure is the juxtaposition between the reinforcing steel and concrete. The loss of bonding between concrete and steel reinforcement in the structure resulted in the total collapse of the concrete. To avoid the need to be reviewed closely the voltage value of concrete and reinforcing steel in order to obtain the force balance between reinforcing steel and concrete. Strong adhesion of concrete to the reinforcing steel is influenced by several factors, one of which is the quality of the concrete. According to the logic of the greater strength of concrete, the more powerful the grip attachment of the reinforcement, but it is still not yet determined the exact value of any amount of concrete quality.

                  The research was done by comparing the strong adhesion between the reinforcing steel in concrete quality is different. This study is an experiment by making a concrete specimen with steel reinforcement D10 30 cm long. Reinforcing steel in concrete is planted to a depth of 16 cm in the upper 14 cm exceeded clamped during testing for tensile (pull out) concrete. Pull test carried out during the 28-day-old specimen by using a Universal Testing Mechine.

                  The results showed that the greater the quality of the concrete load maximum adhesion occurs even greater. Big sticky load values ​​that occur the least and the greatest 1000N 4000 N. Judging from the strong adhesion occurs, the greater the quality of the concrete strong maximum adhesion of concrete to the steel reinforcement greater. Large value of the strong adhesion occurs smallest and the largest 1mpa 2.2 MPa, an increase of about 15% to 26% of any increase in the quality of concrete. Judging from the reinforcing steel stress occurs, the greater the quality of the concrete reinforcing steel stress occurs and the greater the voltage approaches the maximum steel. Great value rebars voltage that occurs most small 18 MPa and 50 MPa greatest. In terms of damage to the test specimen, all specimen damage occurs in concrete, but the greater the quality of the concrete damage that occurs in the less concrete.

Keywords: strong adhesive, concrete, steel reinforcement

Published
2014-08-08
Abstract Views: 252
PDF Downloads: 84