IMPROVING VOCATIONAL HIGH SCHOOL STUDENTS’ LEARNING OUTCOMES THROUGH THE VIRTUAL MECHSIM LABORATORY FOR MANUAL TRANSMISSION SYSTEMS

Authors

  • Muhammad Amirul Nazri Nazri Universitas Negeri Surabaya
  • Rizkyan Ardiya Lutfiansyah
  • Ivan Syahputra
  • Bagus Dwi Cahya Putra

Keywords:

Virtual laboratory; MECHSIM; manual transmission; power flow; learning outcomes

Abstract

Manual transmission systems in vocational education require learning media that connect conceptual understanding with visualization of power-transfer mechanisms. This study examined changes in students’ learning outcomes after a learning session using the Virtual MECHSIM Laboratory. A quantitative one-group pretest–posttest design was used with 18 eleventh-grade students at SMK Antartika Surabaya. Data were collected through achievement tests administered before and after instruction and analyzed using descriptive statistics, the Shapiro–Wilk test, a paired-samples t-test, and normalized gain (N-gain). The mean score increased from 80.56 on the pre-test to 86.22 on the post-test, a mean difference of 5.67 points. The difference scores met the normality assumption (W = 0.902, p = 0.061). The paired-samples t-test indicated a statistically significant difference, t(17) = 8.694, p < 0.001. The mean N-gain was 0.324, categorized as moderate. These findings indicate that students’ scores were higher after the learning sequence, which combined virtual power-flow exploration with verification using a physical manual-transmission trainer. Because the study had no control group, the observed change cannot be attributed exclusively to the Virtual MECHSIM Laboratory.

Downloads

Download data is not yet available.

References

[1] H. Jaya, “Pengembangan laboratorium virtual untuk kegiatan praktikum dan memfasilitasi pendidikan karakter di SMK,” J. Pendidikan Vokasi, vol. 2, no. 1 (2012).

https://doi.org/10.21831/jpv.v2i1.1019

[2] P. B. Herlandy, J. Al Amien, P. Pahmi, and A. Satria, “A virtual laboratory application for vocational productive learning using augmented reality,” J. Pendidikan Teknologi dan Kejuruan, vol. 25, no. 2 (2019).

https://doi.org/10.21831/jptk.v25i2.26504

[3] A. N. Jatsiah and A. Roziqin, “Pengembangan media pembelajaran interaktif berbasis aplikasi Android untuk meningkatkan pemahaman pada kompetensi dasar sistem transmisi manual,” Automotive Science and Education Journal, vol. 10, no. 1 (2021). [Bibliographic details and DOI/URL require verification.]

[4] M. P. Permana, M. Amiruddin, and I. Kholid, “Development of practical learning media 5-speed manual transmission,” J. E-Komtek, vol. 7, no. 2, pp. 418–426 (2023).

https://doi.org/10.37339/e-komtek.v7i2.1584

[5] Y. Kurniawan, R. F. Naryanto, and A. Septiyanto, “Development of Honda Supra manual transmission system demo made in acrylic to improve students’ learning outcomes at Muhammadiyah 04 Vocational School Sukorejo,” J. Mechanical Engineering Learning, vol. 14, no. 1, pp. 1–9 (2025).

https://doi.org/10.15294/jmel.v14.i1.21333

[6] Y. Saputro, Setuju, and N. A. Handoyono, “Developing manual transmission system video for vocational high school students using ADDIE model,” International Journal on Education Insight, vol. 7, no. 2, pp. 285–298 (2026).

https://doi.org/10.12928/ijei.v7i2.15967

[7] R. S. Nugraha and I. Siswanto, “Pengembangan modul interaktif transmisi manual berbasis augmented reality dan video untuk peserta didik Fase F,” Journal of Automotive Technology and Education, vol. 3, no. 2, pp. 165–175 (2026).

https://doi.org/10.21831/jate.v3i2.3692

[8] R. Bödding, S. A. Schriek, and G. W. Maier, “A systematic review and meta-analysis of mixed reality in vocational education and training: Examining behavioral, cognitive, and affective training outcomes and possible moderators,” Virtual Reality, vol. 29, art. 44 (2025).

https://doi.org/10.1007/s10055-025-01118-z

Downloads

Published

2026-11-02
Abstract views: 35 , PDF Downloads: 14