IMPLEMENTATION OF ONSHAPE LEARNING MEDIA TO IMPROVE CAD LEARNING OUTCOMES IN THE MACHINING ENGINEERING VOCATIONAL PROGRAM AT SMKN 2 SURABAYA

Authors

Muhammad Zulfikar Al Azis Universitas Negeri Surabaya
Muamar Zainul Arif Universitas Negeri Surabaya

Keywords:

Onshape, Media Pembelajaran CAD, Mobile Learning, Hasil Belajar, Teknik Pemesinan.

Abstract

The development of digital technology and mobile learning in the era of the Industrial Revolution 4.0 has encouraged the use of cloud-based learning media to improve learning flexibility and effectiveness, particularly in vocational education. This study aims to determine the implementation of Onshape as a learning medium in improving CAD learning outcomes in the Machining Engineering program, as well as to describe student activities and responses during the learning process. This research employed a quantitative approach using a Quasi-Experimental Design with a Nonequivalent Control Group Design. The research sample consisted of two classes: an experimental class using Onshape as the learning medium and a control class using Autodesk Inventor. The research data were obtained through pretests and posttests to measure students’ learning outcomes. The data were analyzed using the Mann–Whitney U test on N-Gain scores. The results showed that the significance value of the Mann–Whitney U test was 0.061 (> 0.05). Therefore, it can be concluded that the implementation of Onshape as a learning medium did not show a significant difference in improving learning outcomes compared to learning using Autodesk Inventor.

Keywords: Onshape, CAD Learning Media, Mobile Learning, Learning Outcomes, Machining Engineering.

Downloads

Download data is not yet available.

References

1. Abuhassna, H., Awae, F., Bayoumi, K., Alzitawi, D. U., Alsharif, A. H., & Yahaya, N. (2022). Understanding Online Learning Readiness among University Students: A Bibliometric Analysis. International Journal of Interactive Mobile Technologies, 16(13), 81–94. https://doi.org/10.3991/ijim.v16i13.30605

2. Arikunto, S. (2018). Dasar-Dasar Evaluasi Pendidikan (3 ed.). Bumi Aksara.

3. Depdiknas. (1998). Penilaian Berbasis Kelas. Departemen Pendidikan Nasional.

4. Fathoni, A., Bayu Prasodjo, Mp., Winarni Jhon, Mp., & Dewanto Muhammad Zulqadri, Mp. (2023). INOVASI MEDIA PEMBELAJARAN DIGITAL PENERBIT CV. EUREKA MEDIA AKSARA.

5. Gaha, R., Nicolet, P. M., Bricogne, M., & Eynard, B. (2021). Teaching experiments for engineering education based on cloud CAD software. Proceedings of the Design Society, 1, 2951–2960. https://doi.org/10.1017/pds.2021.556

6. Harahap, R. H., Buulolo, C., & Marpaung, N. Z. (2023). CONTENT: JOURNAL OF COMMUNICATION STUDIES Analisis Teori Connectivisme, Alternatif Pada Pembelajaran Daring dan Dampaknya Terhadap Motivasi Belajar Peserta Didik. Content: Journal of Communication Studies, 00(00), 0–000. https://doi.org/10.26594/register.v6i1.idarticle

7. Koziar, M., Hubal, H., Burchak, I., Botviniev, M., & Saveliev, D. (2025). The impact of CAD software on the teaching of engineering graphics: a systematic review. Periodicals of Engineering and Natural Sciences Original Research, 13(1), 17–39.

8. Mandorli, F., & Otto, H. E. (2022). Improving the learning experience within mcad education: A tool for students to assist in self-assessment during modeling exercises. Computer-Aided Design and Applications, 19(3), 534–560. https://doi.org/10.14733/CADAPS.2022.534-560

9. Mulyahati, B., Ayudia, I., Mustika, D., Fransyaigu, R., & Kiswanto Kenedi, A. (2025). Menciptakan Iiklim Inklusivitas melalui “Augmented Reality” di Sekolah Dasar. Jurnal Abdidas, 6(2). https://doi.org/10.31004/abdidas.v6i2.1125

10. Onshape. (2023). Onshape for Education. https://www.onshape.com/en/education

11. Pangestu, S. A., Setyosari, P., & Kuswandi, D. (2023). Analisis Persepsi Mobile Learning Readiness Dengan Menggunakan Technology Acceptance Model Dalam Pembelajaran Bahasa Jawa. JKTP: Jurnal Kajian Teknologi Pendidikan, 6(3), 152. https://doi.org/10.17977/um038v6i32023p152

12. Rahman, Hariri, H., Rahman, B., Rini, R., & Saputra, B. (2022). Pelatihan Pengelolaan Dokumen Desa Secara Digital di Kecamatan Mataram Baru Kabupaten Lampung Timur (Vol. 3, Nomor 2). https://sinergi.lppm.unila.ac.id

13. Rosyida, F., Zubaidah, S., & Mahanal, S. (2016). KETERAMPILAN METAKOGNITIF DAN HASIL BELAJAR KOGNITIF SISWA DENGAN PEMBELAJARAN READING CONCEPT MAP-TIMED PAIR SHARE (REMAP-TMPS).

14. Sabaria, R., & Budiman, A. (2022). Pembelajaran Blanded Berbasis Aplikasi Edmodo: Studi Penerapan Pembelajaran Virtual Dalam Perkuliahan Tari Pendidikan. Mudra Jurnal Seni Budaya, 37(1), 98–107. https://doi.org/10.31091/mudra.v37i1.1766

15. Saefudin, S., Afif, I. Y., Raharjo, S., Nugroho, H. A., Cahyandari, D., Subri, M., Aliy, H., & Zein, S. (2024). Peningkatan Keterampilan Menggambar Teknik menggunakan Software CAD untuk siswa SMK. https://doi.org/10.24853/jpmt.6.2.91-97

16. Santosa, M. A., Harlin, H., Hermawan, R., & Ramadhan, A. A. (2024). PELATIHAN APLIKASI CAD (COMPUTER AIDED DESIGN) GURU SMK BIDANG KEAHLIAN TEKNOLOGI DAN REKAYASA DI PALEMBANG. Jurnal Pelita Sriwijaya, 3(1), 001–009. https://doi.org/10.51630/jps.v3i1.121

17. Silolonga, N. (2018). ADAPTASI DAN PENGEMBANGAN INSTRUMEN DIABETES SELF-EFFICACY SCALE (DSES) VERSI INDONESIA UNTUK PENDERITA DIABETES MELITUS TIPE 2 Tesis Sebagai Salah Satu Syarat untuk Mencapai Gelar Magister Keperawatan.

18. Sugiyono. (2018). METODE PENELITIAN Kuantitatif, Kualitatif, dan R&D.

19. Swandi, A., Fauzan, A., Arsyad, S. N., & Rahmadhanningsih, S. (2024). Digital-Based Learning in Lagging Area: Students’ Problems and Expectations. AL-ISHLAH: Jurnal Pendidikan, 16(3), 3227–3236. https://doi.org/10.35445/alishlah.v16i3.2875

20. Sweller, J. (2011). Cognitive load theory. In Psychology of learning and motivation. 55, 37–76. https://www.sciencedirect.com/science/chapter/bookseries/abs/pii/B9780123876911000028