PENGARUH VARIASI KOMPOSISI EKSTRAKTAN TERHADAP KEMAMPUAN ADSORPSI KLORAMFENIKOL MENGGUNAKAN MOLECULARLY IMPRINTED POLYMER (MIP)
THE EFFECT OF VARIATION EXTRACTANT COMPOSITION ON ADSORPTION CAPABILITY OF CHLORAMPHENICOL USING MOLECULARLY IMPRINTED POLYMER (MIP)
Abstract
The aim of this study is optimazing the extractant composition of methanol:acetic acid was with variations of 90:10(v/v), 85:15(v/v), and 80:20(v/v) in the (Molecularly Imprinted Polymer- Chloramphenicol) MIP-CAP synthesis. MIP-CAP is obtained from (Non Imprinted Polymer)NIP through the template extraction process. The template was extracted using maceration method and analyzed using High Performance Liquid Chromatography (HPLC) to determine the extracted CAP. The best extractant composition variation was determined based on % extraction and adsorption capability. The characterization of the MIP-CAP polymer was carried out using Fourier Transform Infra Red (FTIR) to see the presence of the –NO2 group. In this study, the best composition of methanol:acetic acid extractant was 80:20 (v/v) (20% acetic acid) with extraction % gain of 89,5158% and adsorption capability of 4,0725 mg/g with the value of Imprinting Factor (IF) of 3.7369. The higher the addition of acetic acid, the higher the % extraction and adsorption capability. The FTIR characterization of MIP-CAP showed that there was no absorption of the –NO2 group.
Key words: CAP, MIP-CAP, Composition of Extractant
References
Alizadeh, T., Ganjali, M. R., Zare, M. & Norouzi, P., 2012. Selective determination of chloramphenicol at trace level in milk samples by the electrode modified with molecularly imprinted polymer. Food Chemistry, Volume 130, p. 1108–1114.
Singhal, K., Mukim, M. D., Dubey, C. K. & Nagar, J. C., 2020. An Updated Review on Pharmacology and Toxicities Related to Chloramphenicol. Asian Journal of Pharmaceutical Research and Development, 8(4), pp. 104-109.
Zhaoa, C., Sia, Y., Pana, B., Tahab, A. Y., Panc, T. & Suna, G., 2020. Design and fabrication of a highly sensitive and naked-eye distinguishable colorimetric biosensor for chloramphenicol detection by using ELISA on nanofibrous membranes. Talanta, Volume 217, pp. 1-8.
Chrisnandari, R. D., 2018. Sintesis dan Karakterisasi Molecularly Imprinted Polymer Untuk Kloramfenikol Menggunakan Polimerisasi Fasa Ruah. Journal of Pharmacy and Science, 3(1), pp. 40-46.
Samanidou, V., Kehagia, M., Kabir, A. & Furton, K. G., 2016. Matrix Molecularly Imprinted Mesoporous Sol-gel Sorbent for Efficient Solid-Phase Extraction of Chloramphenicol from Milk. Analytical Chamica Acta, pp. 1-43.
Nurrokhimah, H. & Nurerk, P., 2019. A nanosorbent consisting Of a Magnetic Molecularly Imprinted Polymer and Graphene Oxide For Multi-residue Analysis of Cephalosporins,". Microchimica Acta, pp. 1-9.
Barbosa, T., Carvalho, M., Silveira, J., Rios, J., Komatsuzaki, F., Godói, L. & Costa, G., 2014. Homocysteine: validation and comparison of two methods using samples from patients with pulmonary hypertension. J Bras Patol Med Lab, 50(6), pp. 402-409
Omidi, F., Behbahani, M., Abandansari, H. S., Sedeghi, A. & Shahtaheri, S. J., 2014. Application of molecular imprinted polymer nanoparticles as a selective solid phase extraction for preconcentration and trace determination of 2,4-dichlorophenoxyacetic acid in the human urine and different water samples. Journal Of Environmental Health Science and Engineering, 12(137), pp. 1-10.
Azimi, M., Golsefidi, A., Moradi, A. A., Ebadii, M. & Mehrabian, R. Z., 2020. A Novel Method for Extraction of Galegine by Molecularly Imprinted Polymer (MIP) Technique Reinforced with Graphene Oxide and Its Evaluation Using Polarography. Journal of Analytical Methods in Chemistry, pp. 1-9.
Tang, W., Gao, F., Duan, Y., Zhu, T. & Row, K. H., 2017. Exploration of deep eutectic solvent-based molecularly imprinted polymers as solid-phase extraction sorbents for screening chloramphenicol in milk. Journal of Chromatographic Science, 55(6), p. 654–661.
Ashley, J., Shahbazi, M., Kant, K., Chidambara, V., Wolff, A., Bang, D. & Sun, Y., 2017. Molecularly imprinted polymers for sample preparation and biosensing in food analysis: Progress and perspectives. Biosens. Bioelectron, Volume 91, p. 606–615.
Speltini, A., Scalabrini, A., Maraschi, F., Sturini, M. & Profumo, A., 2017. Newest applications of molecularly imprinted polymers for extraction of contaminants from environmental and food matrices: A review. Anal. Chim. Acta, Volume 974, p. 1–26.
Surikumaran, H., Mohamad, S. & Sarih, N. M., 2014. Molecular Imprinted Polymer of Methacrylic Acid Functionalised β-Cyclodextrin for Selective Removal of 2,4-Dichlorophenol. International Journal of Molecular Sciences, Volume 15, pp. 6111-6136.
Raks, V., Al Suod, H. & Buszewski, B., 2018. Isolation, Separation, and Preconcentration of Biologically Active Compounds from Plant Matrices by Extraction Techniques. Chromatographia, Volume 81, p. 189–202.
Madikizela, L., Tavengwa, N. & Pakade, V., 2018. Molecularly Imprinted Polymers for Pharmaceutical Compounds Synthetic Procedures and Analytical Applications.. IntechOpen, p. 47–67.
Balamurugan, K., Gokulakrishnan, K. & Prakasam, T., 2016. Preparation and evaluation of molecularly imprinted polymer liquid chromatography column for the separation of ephedrine enantiomers. Arabian Journal of Chemistry, Volume 9, p. 528–536
Lorenzo , R. A., Carro, A. M., Alvarez-Lorenzo, C. & Concheiro, A., 2011. To Remove or Not to Remove? The Challenge of Extracting the Template to Make the Cavities Available in Molecularly Imprinted Polymers (MIPs). International Journal of Molecular Sciences, Volume 12, pp. 4327-4347.
Gornik, T., Shinde, S., Lamovsek, L., Koblar, M., Heath, E., Sellergren, B. & Kosjek, T., 2020. Molecularly Imprinted Polymers for the Removal Antide-Pressants from Contaminated Wastewater. Polymers 2020, 13, 120., 13(120), pp. 1-19.
Ellwanger, A., Karlsson, L., Owens, P. K., Berggren, C., Crecenzi, C., Ensing, K., Bayoudh, S., Cormack, P., Sherrington, D. & Sellergren, B., 2001. Evaluation of methods aimed at complete removal of template from molecularly imprinted polymers. Analyst, Volume 126, p. 784–792.
Mohajeri, S., Karimi, G. & Khansari, M., 2010. Clozapine imprinted polymers: Synthesis, characterization and application for drug assay in human serum. Analytica Chimica Acta, Volume 683, p. 143–148.
Zhang, Y. & Lei, J., 2013. Synthesis and Evaluation of Molecularly Imprinted Polymeric Microspheres for Chloramphenicol by Aqueous Suspension Polymerization as a High Performance Liquid Chromatography Stationary Phase. Bull. Korean Chem. Soc., 34(6), pp. 1839-1844.
Wijayani, F., Supriyanto, G. & Suyanto, 2014. Karakterisasi Molecularly Imprinted Polymer (MIP) Hasil Polimerisasi Presipitasi Sebagai Adsorben Kloramfenikol. Jurnal Matematika dan Ilmu Pengetahuan Alam, 17(2), pp. 51-56.
Boulanouar, S., Mezzache, S., Combès, A. & Pichon, V., 2018. Molecularly imprinted polymers for the determination of organophosphorus pesticides in complex samples. Talanta, Volume 176, p. 465–478.
Mudiam, M., Chauhan, A., Jain, R., Dhuriya, Y., Saxena, P. & Khanna, V., 2014. Molecularly imprinted polymer coupled with dispersive liquid–liquid microextraction and injector port silylation: A novel approach for the determination of 3-phenoxybenzoic acid in complex biological samples using gas chromatography–tandem mass. Journal of Chromatography B, Volume 945, pp. 23-30.
Pardeshi, S., Dhodapkar, R. & Kumar, A., 2012. Studies of the Molecular Recognition Abilities of Gallic Acid-Imprinted Polymer Prepared Using a Molecular Imprinting Technique. Adsorption Science & Technology, 30(1), pp. 23-34.
Chacón, A. H., Cetó, X. & Valle, M., 2021. Molecularly imprinted polymers- towards electrochemical sensors and electronic tongues. (Review). Analytical and Bioanalytical Chemistry.
Huang, Y. J., Chang, R. & Zhu, Q. J., 2018. Synthesis and Characterization of a Molecularly Imprinted Polymer of Spermidine and the Exploration of Its Molecular Recognition Properties. Polymers, 10(1389), pp. 1-17.
Madikizela, L. M., Mdluli, P. S. & Chimuka, L., 2016. Experimental and theoretical study of molecular interactions between 2-vinyl pyridine and acidic pharmaceuticals used as multi-template molecules in molecularly imprinted polymer. React. Funct. Polym, Volume 103, p. 33–43.
Hijazi, H. Y. & Bottaro, C. S., 2020. Molecularly Imprinted Polymer Thin-film As a Micro-Extraction Adsorbent For Selective Determination Of Trace Concentrations Of Polycyclic Aromatic Sulfur Heterocycles In Seawater. Journal of Chromatography A 1617, Volume 460824, pp. 1-8.
Bakhtiar, S., Bhawani, S. A. & Shafqat, S. R., 2019. Synthesis and characterization of molecular imprinting polymer for the removal of 2-phenylphenol from spiked blood serum and river water. Chem. Biol. Technol. Agric, 6(15), pp. 1-10
Gama, M. R. & Bottoli, C., 2017. Molecularly imprinted polymers for bioanalytical sample preparation. J. Chromatogr. B , Volume 1043, p. 107–121.
Dirjen POM, 2012. Farmakope Indonesia Edisi V. Jakarta, Kementerian Kesehatan RI
Sianita, M. M., Puspaningsih, N. T., Khazanah, M. & Supriyanto, G., 2019. Comparison of the method used for extraction chloramphenicol from its Molecularly Imprinted Polymer (MIP) using chloroform as porogen. Atlantis Highlights in Chemistry and Pharmaceutical Sciences, Volume 1, pp. 17-18.
Maranata, G. J., Surya, N. O. & Hasanah, A. N., 2021. Optimising factors affecting solid phase extraction performances of molecular imprinted polymer as recent sample preparation technique. Heliyon, 7(1), pp. 1-9.
Huffman, B., Poltash, M. & Hughey, C., 2012. Effect of Polar Protic and Polar Aprotic Solvents on Negative-Ion Electrospray Ionization and Chromatographic Separation of Small Acidic Molecules. Analytical Chemistry, Volume 84, p. 9942−9950.
Kalpesh, A. & Ketan, S., 2018. The Study of Chloramphenicol for Ophthalmic Formulation. International Journal of Scientific Research and Reviews, 7(1), pp. 173-181.
O’Neil, M. J., 2001. The Merck Index- An Encyclopedia of Chemicals, Drugs and Biologicals. 13th edition penyunt. Whitehouse Station: Merck and Co. Inc.
Sanagi, M. M., Salleh, S., Ibrahim, W. A., Naim, A. A., Hermawan, D., Miskam, M., Hussain, I. & Aboul-Enein, H., 2013. Molecularly imprinted polymer solid-phase extraction for the analysis of organophosphorus pesticides in fruit samples. Journal of Food Composition and Analysis, Volume 32, p. 155–161.
Sun, C., Wang, L., Huang, J., Yao, D., Wang, C. Z., Zhang, L., Hou, S., Chen, L. & Yuan, C. S., 2017. The Multi-Template Molecularly Imprinted Polymer Based on SBA-15 for Selective Separation and Determination of Panax notoginseng Saponins Simultaneously in Biological Samples. Polymers, 9(653), pp. 1-18
Xiao, X., Yan, K., Xiu, X. & Li, G., 2015. Rapid analysis of ractopamine in pig tissues by dummy-template imprinted solid-phase extraction coupling with surface-enhanced Raman spectroscopy. Talanta, Volume 138, pp. 40-45.
Shafqat, S., Bhawani, S., Bakhtiar, S. & Ibrahim, M., 2020. Synthesis of molecularly imprinted polymer for removal of Congo red. BMC Chemistry, 14(7), pp. 1-15.
Cao, J., Yan, H., Shen, S., Bai, L., Liu, H. & Qiao, F., 2016. Hydrophilic molecularly imprinted melamine‒urea‒formaldehyde monolithic resin prepared in water for selective recognition of plant growth regulators. Analytica Chimica Acta, pp. 1-39.
Kooh, M., Dahri, M., Lim, L. & Malik, O., 2016. Batch adsorption studies of the removal of methyl violet 2B by soya bean waste: isotherm, kinetics and artificial neural network modelling. Environ Earth Sci, 75(783), pp. 1-14.
Liu, S., Pan, J., Zhu, H., Pan, G., Qiu, F., Meng, M., Yao, J. & Yuan, D., 2016. Graphene oxide based molecularly imprinted polymers with double recognition abilities: The combination of covalent boronic acid and traditional non-covalent monomers. Chem. Eng. J, Volume 290, p. 220–231
Bitas, D. & Samanidou, V., 2018. Molecularly Imprinted Polymers as Extracting Media for the Chromatographic Determination of Antibiotics in Milk. Molecules, 23(316), pp. 1-33.
PDF Downloads: 195